QIAcube HT Accessories and Consumables

For automated mid- to high-throughput nucleic acid purification on the QIAcube HT

Products

QIAcube HT Plasticware

Cat. No. / ID: 950067

Plasticware for 480 typical preps on QIAcube HT: 5 S-Blocks, 5 Elution Microtubes RS (EMTR), 120 x 8-Well Strip Caps for EMTR, 9 x 96 Filter-Tips OnCor C, TapePad

₩570,000.00

Quantity

Carbon filter

Cat. No. / ID: 9019483

Replacement cartridge (one filter)

₩1,049,000.00

Quantity

Adapter, Reagent Trough R1 Position Plate

Cat. No. / ID: 9019513

For holding combinations of 70 ml and 170 ml Reagent Troughs (cat. nos. 990554, 990556) in the R1 position on the instrument worktable

₩611,000.00

Quantity

Accessories Pack, QXT

Cat. No. / ID: 9022649

For upgrading QIAxtractor instruments to process dedicated QIAcube HT kits: Transfer Carriage, Riser Block EMTR, and Channeling Adapter

₩2,954,000.00

Quantity

Adapter, Reagent Trough SBS Plate

Cat. No. / ID: 9018935

For holding combinations of 70 ml and 170 ml Reagent Troughs (cat. nos. 990554, 990556) in the SBS-standard plate position on the instrument worktable

₩1,049,000.00

Quantity

Filter-Tips, OnCor C, 200 µl (10 x 96)

Cat. No. / ID: 990610

Disposable filter-tips; for use with QIAcube HT and QIAxtractor

₩286,000.00

Quantity

Elution Microtubes RS (24 x 96)

Cat. No. / ID: 120008

Elution Microtubes RS (EMTR) for use with QIAcube HT: 24 x 96 Elution Microtubes in racks of 96; includes strip caps

₩701,000.00

Quantity

Polycap filter

Cat. No. / ID: 9019488

Replacement cartridge (one filter)

₩549,000.00

Quantity

HEPA filter

Cat. No. / ID: 9019486

Replacement cartridge (one filter)

₩465,000.00

Quantity

Tip Disposal Box Holder

Cat. No. / ID: 9243592

Holds the tip disposal box in place and ensures correct positioning under the tip chute; suitable for QIAcube HT, QIAxtractor, and QIAgility instruments

₩314,000.00

Quantity

Tape Pads (5)

Cat. No. / ID: 19570

Adhesive tape sheets for sealing multiwell plates and blocks: 25 sheets in 1 bag and 125 sheets in 1 bag

₩112,000.00

Quantity

Reagent Trough (with lid), 170 ml

Cat. No. / ID: 990556

Box of 20 plus lid; liquid reservoirs; used with Reagent Trough R1 Position Plate and Reagent Trough SBS Plate.

₩182,000.00

Quantity

Reagent Trough (with lid), 70 ml

Cat. No. / ID: 990554

Box of 10 plus lid; liquid reservoirs; used with Reagent Trough R1 Position Plate and Reagent Trough SBS Plate. For use with QIAgility Operating Software version 4.17.1 only.

₩111,000.00

Quantity

S-Blocks (24)

Cat. No. / ID: 19585

96-well blocks with 2.2 ml wells, 24 per case

₩581,000.00

Quantity

Tip Disposal Box

Cat. No. / ID: 990550

Box of 10; plastic waste collection box with secure-fitting lid to fit tip ejector chute

₩103,000.00

Quantity

Product Details

QIAcube HT Accessories and Consumables are for use with QIAcube HT instruments and provide simple and reliable mid- to high-throughput nucleic acid purification in 96-well format from a range of starting sample materials.

Resources

QIAcube HT instrument operating software. This software offers a state-of-the-art user interface and a wizard-guided experimental setup for quick and easy purification experiments.

For software installation instructions, please refer to the QIAcube HT Unpacking and Installation Instructions or to the QIAcube HT User Manual, chapter 4.4.1.

Important: It is not possible to install both QIAcube HT Prep Manager Software and QIAcube HT Operating Software 4.17 on the same computer. Please uninstall QIAcube HT Operating Software 4.17 before installing QIAcube HT Prep Manager Software. For more information, contact QIAGEN Technical Services.

FAQ

No, the two software applications are not interchangeable.

Additionally, the QIAcube HT and QIAxtractor software cannot be installed on the same computer. The QIAcube HT software versions is v4.17 or higher, while the QIAxtractor software version is v4.16 or lower.

FAQ ID -9102

The QIAcube HT Plasticware content is calculated for use with the extraction protocol working in batches of 96 samples. If running smaller batches and/ or the transfer protocol, additional consumables are required.

FAQ ID - 4010

No, this upgrade is not possible.

FAQ ID -9104

The Support Packages are important when reporting an issue to QIAGEN Technical Services. Upon completion of each run, the software automatically saves a support package.

To retrieve a support package, click Help in the QIAcube HT or QIAxtractor software and select Choose support package. In the new windows, select the support package that corresponds to the issue and send it to QIAGEN Technical Services.

FAQ ID -9100

1. Check the vacuum tubing to make sure it is not pinched or obstructed in some way. Sometimes the tubing can become pinched against the bench top when the vacuum station is placed too far from the instrument.

2. Make sure that the channeling adapter is properly placed. Check if the carriage is moving the plate completely from the waste chamber position to the elution chamber position. If the calibration seems incorrect, the instrument may need to be re-taught at this position.

3. When using less than a full plate, make sure all the unused columns are covered with an adhesive seal.

Also, make sure each column of 8 samples is full. When processing a number of samples that results in < 8 samples per column, use water as a substitute in the empty positions until the column is filled. This ensures even vacuum across all unsealed well positions.

4. Make sure correct plates are used for the selected protocol.

5. When the vacuum is on, please listen for any hissing noise from the tubing that is coming down to the waste container. This could indicate leaks in the tubing.

If the issue persists, please contact QIAGEN Technical Service.

FAQ ID -9106

Make sure the QIAcube HT or QIAxtractor software uses the same COM port number as assigned to the QIAcube HT or QIAxtractor instrument on the computer. The COM port setting can be checked by clicking Options\Robot Setup\Select COM port in the QIAcube HT or QIAxtractor software.

Ensure that the cable between the instrument and the computer is securely inserted. Power on the instrument first, and then launch the QIAxtractor/QIAcube HT software.

The instrument has both RS-232 (serial) and USB interfaces for computer connection. Try an RS-232 cable if the communication cannot be established between the instrument and computer with a USB cable.

If the issue persists, please contact QIAGEN Technical Services.

FAQ ID -9101